Set Points from 0.07″ to 85″ w.c. Repetitive Accuracy within 2%
Essential for industrial environments, the SERIES 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved.
CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.
Please see Series AT21823 for ATEX approved
|Service:||Air and non-combustible, compatible gases.|
|Wetted Materials:||Consult factory.|
|Temperature Limits||-30 to 180°F (-34 to 82.2°C). 1823-00, -20 to 180°F (-28.9 to 82.2°C).|
|Pressure Limits:||10 psig (68.95 kPa) continuous, 25 psig (172.4 kPa) surge.|
|Switch Type:||Single-pole double-throw (SPDT).|
|Electrical Rating:||15 A @ 120-480 VAC, 60 Hz. Resistive 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz. De-rate to 10 A for operation at high cycle rates.|
|Electrical Connection:||3 screw type, common, normally open and normally closed.|
|Process Connection:||1/8″ female NPT.|
|Mounting Orientation:||Diaphragm in vertical position. Consult factory for other position orientations.|
|Set Point Adjustment:||Screw type inside mounting spud.|
|Weight:||1 lb, 5 oz (595 g).|
|Agency Approvals:||CE, CSA, FM, UL. NOTE: Optional (-EXPL) Explosion-proof Enclosure does not possess any agency approvals|