VC-SERIES BALANCED HYDRONIC VALVES 2–WAY

  • The VC series balanced hydronic valves allow greater control of hot and/or cold water flow.
  •  The VC series balanced hydronic valves are designed for both domestic boiler heating and domestic cooling applications.

Voltage: 24 V

100 … 130 V

200 … 240 V

Power consumption: 6 Watt maximum at nominal voltages (during valve position

change only)

6 VA for transformer and wiring

Maximum power time: 15%

End switch rating: 2.2 A inductive from 5 … 120 Vac

1.0 A inductive above 120 … 277 Vac

Minimum dc switching capbility: 0.05A 24 Vdc

Nominal timing: Valve opens in 6 seconds @ 60 Hz (20% longer @ 50 Hz)
Pipe fitting sizes: See table 1.
Ambient temperature: 0 … 65 _C
Fluid temperature: 1 … 95 _C (120 _C short duration peak)
Shipping storage temperature: –40 … 65 _C
Pressure rating: Static: 20 bar

Burst: 100 bar

Maximum operating pressure differential: 4 bar
Flow: 2-way

Flow can be in either direction

Valve is closed without the actuator mounted

3-way

Flow can be diverting (AB to A or B) or mixing (A or B to AB).

Port A is closed without the actuator mounted

Valve material: Body: bronze

  • 2–way or 3–way body
  • Wide variety of pipe connections including:Control by a low or line voltage SPST or SPDT control
  • 24 Vac, 100 … 130 Vac or 200 … 240 Vac actuators available
  • SPDT auxiliary switch available
  • Quick connect electrical connections or 1000 mm leads
  • Minimal actuator power consumption
  • Double insulated actuator
  • Pressure differential up to 4 bar

Documentation:

VC Series

Catalog :

Related Products