1/8 DIN, Dual-Line 6-Digit Display, Flow Rate and Totalizer
The Series PPM has a unique, rugged, NEMA 4X front panel design that makes it nearly impenetrable in typical applications. The weatherproof, UV resistant, large, dual line display allows for more information, making it easier to read and simpler to program. The intensity of the display can be adjusted allowing this meter to be utilized in dark rooms as well as outdoors, due to its sunlight readable display. It features up to eight visual alarm set points to trigger certain events and three function keys which can be programmed to provide direct menu access. With up to four relays available, the PPM features latching, non-latching, sampling, pump alteration control, and a fail-safe action. Offering programmable delay time, this meter prevents recognition of false maximum or minimum reading which may be caused by the start-up or unusual process events. The PPM provides three security passwords that restrict modification of programmed settings. This unit has the ability to obtain non-linear input signals and linearize them with a general purpose 32-point linearizer. Choose from RS-232, RS-422/485 serial communication options or any available expansion modules, accessories, and enclosures.
The PPM displays flow rate and total simultaneously, with a programmable relay and 4 to 20 mA option for flow rate or flow total. The PPM is a 1/8 DIN digital panel meter specifically designed for displaying flow rate and total from a pulsed input provided by open collector, NPN, PNP, TTL, switch contact, sine wave, or square wave.
Note: Shallow depth meters will not work with this Series.
Input: | Field selectable: Pulse or square wave 0 to 5V, 0 to 12V, or 0 to 24V @ 30 kHz; TTL; open collector 4.7 kΩ pull-up to 5V @ 30 kHz; NPN or PNP transistor, switch contract 4.7 kΩ pull-up to 5V @ 40 Hz. |
Input Impedance: | 50 to 100 Ω. |
Accuracy: | ±0.03% of calibrated span ±1 count. |
Power Requirements | 85 to 265 VAC 50/60 Hz, 90 to 265 VDC, 20 W max or 12 to 24 VDC ± 10%, 15 W max |
Display: | Dual-line 6-digit display, 0.60″ and 0.46″. |
Decimal Points: | 5-positions, user selectable. |
Temperature Limits: | Operating: -40 to 149°F (-40 to 65°C); Storage: -40 to 185°F (-40 to 85°C). |
Enclosure Rating: | NEMA 4X, IP65 front. |
Electrical Connections: | Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters. |
Output Signal: | 4 to 20 mA. |
Switch Rating: | 2 or 4 SPDT (Form C) internal and/or 4 SPST (Form A) external; rated 3A @ 30 VDC and 125/250 VAC resistive load; 1/14 HP @ 125/250 VAC for inductive loads. |
Power Consumption: | 85 to 265 VAC models: 200 mA @ 24 VDC; 12 to 24 VDC models: 100 mA @ 24 VDC; Second supply with output 2 models: 40 mA @ 24 VDC. |
Time Delay: | 0 to 999.9 seconds, on & off relay time delays programmable and independent for each relay. |
Shipping Weight: | 9.5 oz (269 g). |
Agency Approvals: | CE, RoHS, cUL, UL. |
Catalog :
CE, RoHS, cUL, UL.
[:vi]SERIES 2000 Magnehelic® Gage là đồng hồ áp độ chính xác cao, 2% full scale, nhiều lựa chọn với 81 models thích hợp chính xác cho các nhu cầu. Sử dụng dễ dàng, cơ cấu kim đồng hồ là loại không ma sát, hiện thị nhanh chóng các chỉ số áp suất thấp- cao, áp suất chân không, hay độ chênh áp của các loại khí không ăn mòn. Thiết kế chống được va chạm, rung động và quá áp.
Ghi chú: Có thể sử dụng với khí Hydro. Có thể đặt hang với màn Buna-N. Áp suất sử dụng dưới 35Psi.
Tham khảo them SERIES AT22000 nếu cần chứng chỉ ATEX[:en]Select the SERIES 2000 Magnehelic® Gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Please see SERIES AT22000 for ATEX approved.[:]
[:vi]SERIES TE là cảm biến gắn ống gió, ống nước có thể dung để theo dõi nhiệt độ gió, nước trong hệ thống quản lý toà nhà hay trong AHU. Cảm biến có loại dùng mặt bích gắn vào ống gió dùng để theo dõi nhiệt độ gió cấp – gió hồi nhờ vào tính hiệu thermistor hay RTD cấp đến bộ điều khiển. Cảm biến nhiệt độ nước được cấp với vỏ sensor chuyên dùng, dùng để theo dõi nhiệt độ nước nóng hay nước lạnh trong toà nhà. Thông thường cảm biến nhiệt độ nước được dùng với Thermalwell.
Với model dung nhiệt trở hay RTD, vui long tham khảo bảng tương quan nhiệt độ và điện trở.[:en]The SERIES TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.
For models with resistive thermistors or RTD outputs, please click here for temperature to resistance lookup tables.[:]
[:vi]Series BDPA là công tắc áp chênh áp suất có sẵn chuông và đèn báo động, dùng đo áp suất, chân không, hay chênh áp. Hai đơn vị đo Pascal và Inch W.C, cho phép chuyển đổi dễ dàng. BDPA có các thang đo từ 0.08 in W.C (20Pa) lên đến 20 in W.C ( 5000Pa). Cảm biến màng Silicone và vỏ PA 6.6 giúp ADPS thích hợp sử dụng cho các khi không cháy.
Series BDPA có nhiều thang đo thích hợp cho nhiều ứng dụng. BDPA có thể dùng nguồn 24VDC/VAC hoặc Pin. Khi kết nối nguồn 24VDC / VAC, thi Pin sẽ đóng vai trò nguồn dự phòng khi mất điện. Khi áp suất đạt ngưỡng cài đặt, chuông sẽ kêu và đèn sẽ sáng. Có thể nối vào relay để đưa tín hiệu về DDC hoặc hệ BMS. Nút bấm trên thân máy có thể được ấn vào để reset bởi người sử dụng khi công tác bảo trì thực hiện xong. Nếu ADPA được gắn ở vị trí khó thao tác, có thể tắc cảnh báo bằng thông qua kết nối với công tắc này.
Công tắc chênh áp suất BDPA có nhiều ứng dụng cho lưới lọc, quạt và thông gió, hay nhưng vị trí thay thế khó khan, khó kéo dây.
Ghi chú: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).[:en]The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.
The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.
The Series BDPA Differential Pressure Alarm's great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.
Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).[:]