· Thân van làm bằng gan, lá làm bằng thép không gỉ |
· Kích thước: DN50-DN300 |
· 16 bar at – 10oC to 120oC
· Water and natural liquids application shell (water) 24 bar, seat (water) 17.6 bar · Vỏ van chịu được áp suất 24 bar, lá van |
Hệ thống nước nóng, thủy lợi và cấp nước, hệ thống làm sạch và thoát nước thải, đường chiếu sáng, chu trình dầu mát.
Tài liệu kỹ thuật:
Catalog :
[:vi]Thiết bị truyền động giảm chấn trực tiếp không có lò xo cung cấp 2 trạng thái đóng mở thích hợp trong việc điều khiểm damper gió với động cơ 5 Nm và 10 Nm.[:en]This non-spring return direct-coupled damper actuator provides floating and two-position control for:reliable control for air damper applications with up to 10 sq ft / 44 lb-in. (5 Nm) and 20 sq ft / 88 lb-in. (10 Nm) (seal- less damper blades; air friction-dependent).[:]
[:vi]SERIES DH3 là bộ điều khiển chênh áp suất kỹ thuật số có màn hình hiện thị 3-trong-1, có relay, tín hiệu suất ra dạng dòng, tất cả nằm trong vỏ Photohelic. Bao gồm 3 chức năng giúp giảm các thiết đo khác, giảm chi phí lắp đặt và thời gian. Bộ DH3 thích hợp để đo áp suất, vận tốc gió và các ứng dụng lưu lượng, có độ chính xác 1% toàn dãy và thậm chí cho các thang đo thấp 0.25”w.c đến 2.5” w.c. Với thang đo 5”w.c độ chính xác 0.5%. Đo 2 chiều cũng có sẵn.
Bộ điều khiển DH3 Digihelic® cho phép chọn đo áp suất, vận tốc hay lưu lượng với nhiều đơn vi đo. 2 replay có thể điều chỉnh được deadband với tính hiệu xuất là 4-20mA.
Lập trình dễ dàng nhờ vào 5 phím và menu đơn giản: bảo mật; lựa chọn áp suất, vận tốc gió hay lưu lượng; lựa chọn đơn vị đo; cài đặt set point, báo động cho mức cao/ thấp; tự động hoặc reset bằng tay; xem các thông số cao nhất/thấp nhất;tín hiệu suất4-20mA thích hợp cho các ứng dụng.
Tham khảo thêm SERIES AT2DH3 nếu cần chứng nhận ATEX[:en]The SERIES DH3 Digihelic® Differential Pressure Controller is a 3-in-1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output all packed in the popular Photohelic® gage style housing. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for pressure, velocity and flow applications, achieving a 1% full scale accuracy on ranges down to the extremely low 0.25″ w.c. to 2.5″ w.c. full scale. Ranges of 5″ w.c. and greater maintain 0.5% F.S. accuracy. Bi-directional ranges are also available.
The Series DH3 Digihelic® controller allows the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. 2 SPDT control relays with adjustable deadbands are provided along with a scalable 4-20 mA process output.
Programming is easy using the menu key to access 5 simplified menus which provide access to: security level; selection of pressure, velocity or flow operation; selection of engineering units; K-factor for use with flow sensors; rectangular or circular duct for inputting area in flow applications; set point control or set point and alarm operation; alarm operation as a high, low or high/low alarm; automatic or manual alarm reset; alarm delay; view peak and valley process reading; digital damping for smoothing erratic process applications; scaling the 4-20 mA process output to fit your applications range and field calibration.
Please see SERIES AT2DH3 for ATEX approved.[:]
[:vi]Series TE-W là cảm biến nhiệt độ gắn tường chi phí thấp, cung cấp nhiệt độ phòng cho các hệ thống quản lý toà nhà. Mục đích thông gió thích hợp cho các toà nhà, cảm biến sẽ đo chính xác nhiệt độ nhiệt độ phòng. Vỏ máy có thiết kế tiện dụng, dễ lắp đặt.
Series TE-WSS là cảm biến nhiệt độ có mặt bằng thép không rỉ dung đo nhiệt độ lớp học, khu sản xuất. Với thiết kế trơn, gọn, giúp tránh bụi bám. Cảm biến có mặt sau được cách nhiệt giúp hạn chế bị tác động bởi nhiệt độ của vách tường.[:en]The Series TE-W Wall Mount Temperature Sensor provides a low cost temperature input for any building management system. With large vents in the housing for proper air flow, the sensor accurately measures the ambient temperature in hotel rooms or offices. Multiple mounting holes on the wall plate allow for mounting to numerous surfaces.
The Series TE-WSS Stainless Steel Wall Plate Temperature Sensor measures the ambient air temperature in classrooms and industrial environments. By having a flush mount design, the temperature sensor can withstand a wash down. A foam gasket prevents ambient temperature from behind the wall plate from skewing the temperature measurements. The discrete stainless steel wall plate sensor also hides the sensor to prevent tampering. Each sensor comes with a terminal block and two mounting screws for quick installation.
Note: For models with resistive thermistors or RTD outputs, please click here for temperature to resistance lookup tables.[:]